Introductory Information - HP Designjet T620 Serie Einführende Informationen

EN

Introductory Information

Other sources of information
A complete guide to your printer, Using your printer, is available on the CD that comes with your printer, and on the
Web (http://www.hp.com/go/knowledge_center/). That guide provides information on the following topics:
• Installing the software
• Setting up the printer
• Personalizing the printer
• Paper handling
• Printing
• Color management
• Practical printing examples
• Handling ink cartridges and printheads
• Maintaining the printer
• Accessories
• Troubleshooting paper issues
• Troubleshooting print-quality issues
• Troubleshooting ink cartridge and printhead issues
• Troubleshooting general printer issues
• HP Customer Care
• Printer specifications
• For the HP Designjet T1120, there is also information on the following topics:
• Job queue management
• Retrieving printer usage information
You can also find legal and warranty information on the CD. Further information is available at HP's support Web
site (http://www.hp.com/go/knowledge_center/).
Legal notices
The information contained herein is subject to change without notice. The only warranties for HP Products and
services are set forth in the express warranty statement accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Safety precautions
The following precautions ensure the proper use of the printer and prevent the printer from being damaged. Follow
these precautions at all times.
• Use the power supply voltage specified on the nameplate. Avoid overloading the printer's electrical outlet with
multiple devices.
• Ensure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire and
susceptibility to electromagnetic interference.
• Do not disassemble or repair the printer yourself. Contact your local HP Service Representative for service, see
Using your printer.
• Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power cord. A
damaged power cord has risk of fire and electric shock. Replace a damaged power cord with an HP-approved
power cord.
• Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the printer.
Doing so may cause fire, electric shock or other serious hazards.
• Power off the printer and unplug the power cable from the power outlet in any of the following cases:
• When placing your hands inside the printer
• If there is smoke or an unusual smell coming from the printer
• If the printer is making an unusual noise not heard during normal operation
• A piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts of the printer
• During an electrical (thunder/lightning) storm
• During a power failure.
1