Husqvarna TXC 250 Bedienungsanleitungen Seite 107

HEADLAMP BULBS REPLACEMENT (TE)
To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to
the instrument panuel support (A);
- push forward the headlamp carrier (B) and pull it towards the
high (C) in order to uncouple from the two lower supports.
C
1
B
- remove the headlamp fairing (1);
- slide off the rubber boot (2);
- release the clip (3) and remove the bulb holder (4);
- remove the bulb (5).
To replace the parking light bulb (5) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
A
3
4
SPECIFICATIONS - OPERATION - MAINTENANCE
TAIL LIGHT (TE)
The tail light is a LED light; Replace it when it does not func-
tion.
2
5
EN - 51