Front Panel And Drum Loader - imacon Flextight Progression Anwenderhandbuch

Hardware ReferenceÑFlextight Progression
8

Front Panel and Drum Loader

Front Panel and Drum Loader
Figure 1:
Light Table: helps you to align your originals.
A
B Original Holder Clasp: the ßexible original holders slide into a slot
here and are held in place by a magnetic clasp.
C Power Indicator (Green): Remains lit when ready to scan. At
power-up, the light blinks to indicate that Þrmware must be loaded
(it will be loaded automatically when you run ColorFlex).
D Power/Cancel/Reset Button: This button has several functions:
¥ Provided the main power switch on the back panel is switched
¥ If the scanner is currently working (making a scan or moving
¥ If the scanner is not responding, press and hold this button for
E Zoom Indicator (Yellow): lights while the scanner is repositioning
the optics to scan in a new format.
F Drawer Button: press here to open and close the ßatbed drawer. If
the drawer is already in motion, this button cancels the action.
G Busy Indicator (Red): lights when scanning. If blinking when not
scanning, then an error existsÑplease contact your Flextight dealer
for assistance.
H Flexible Holder Guides: all ßexible holders Þt between two rails to
keep them straight.
A
H
Front panel features
on (see ÒBack Panel & ConnectorsÓ on page 10), this button will
turn the scanner on or off.
the ßatbed drawer), this button will cancel the action, but not
turn off the scanner.
three seconds to reset and turn off the scanner.
B C
G
Imacon Flextight Progression UserÕs Guide
D
E
F