iiyama AS4314UT Bedienungsanleitung Seite 16

B Press the Auto Button. (Direct adjustment)
C Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Setup.
D Adjust the V.Position so that the top and bottom of the picture frame will fit to the
display area.
E 1) Adjust the H.Position so that the left side of the picture frame will move to the left
edge of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
n When the left side of the picture frame moves apart from the left edge of the display
NOTE
area during the Clock adjustment, adjust steps 1) and 2).
n Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
n The picture may flicker during the H.Position, V.Position and Clock adjustment.
12 OPERATING THE MONITOR
01-4314ut-E.p65
+
–
+
–
+
–
16 2 001/11/2 2 , Χ΋ 03:2 6