Controls And Connectors - iiyama AS4314UT Bedienungsanleitung

CONTROLS AND CONNECTORS

/
6 BEFORE YOU OPERATE THE MONITOR
01-4314ut-E.p65
<Front>
①
②
③
④
⑤
⑥
<Back>
0
10
A Auto Button (Auto Setup) / Exit
NOTE
Adjust H.Position, V.Position, Focus
and Clock automatically.
n
The Auto Setup needs to display the
Test.bmp in order for it to work correctly.
(See page 11 for SCREEN ADJUSTMENTS.)
n
The screen becomes dark for approximately
five seconds during the adjustment.
n
1. When OSD menu is in active status,
this button will act as EXIT-KEY. (EXIT
OSD menu)
2. When OSD menu is in off status, press
this button over 2 seconds to activate
the Auto Adjustment function. The Auto
Adjustment function is used to set the
H.Pos, V.Pos, Clock and Focus.
B Brightness /
C Contrast /
D Menu Button
E Power Indicator
Green: Normal operation
NOTE
Orange: Power Management
The monitor enters into
power
mode which reduces the
power consumption to
less than 3W when
receiving no horizontal
and/or vertical sync
signal.
F Power Switch
G Signal Cable for D-Sub Connection (Fixed)
H Connector for AC Adapter
2001/11/22, Χ΋ 03:26
management