Marshall ORIGIN 50 Benutzerhandbuch Seite 6

ENGLISH
ORIGIN COMBO
(HEAD SHOWN ON PREVOUS PAGE)
PULL BOOST
INPUT GAIN
11 10
9. TILT
Adjusts the voice of your Origin from
normal to high treble at the input stage.
Tilt: this control provides a blend between
normal and high treble pre-amplifier
channels on a classic Marshall. Dialled all
the way to the left the sound is warm and
full, providing a thick overall tone. When
dialled all the way to the right the overall
tone is brighter for players looking for
more cut through and bite. When set at 12
o'clock the tilt control provides an equal
blend of both pre-amp voicings.
3.0
FRONT PANEL FUNCTIONS
THE INFORMATION SHOWN APPLY TO BOTH 20 AND 50, HEAD AND COMBO FORMATS.
EQUALISATION
TILT BASS MIDDLE TREBLE
6
9 8
7
10. GAIN
Controls the amount of pre-amp gain
applied to your sound, the more gain
the more distortion. Pulling the control
knob activates a gain boost increasing the
level of drive in the pre-amp. This can be
operated using a 2-way foot switch
(PEDL-90016).
Note: when a foot switch is connected
it will override the front panel control
meaning the gain boost can only be turned
on and off using the foot switch.
OUTPUT
MASTER PRESENCE
5 4
11. INPUT
Connect your guitar to the amplifier using
a ¼" instrument cable.
CONTINUED
LOW OFF
MID
HIGH ON
OUTPUT POWER
3 2 1