Peavey TRANSTUBE-Serie Bedienungsanleitung Seite 5

Rated Power and Load:
40 W RMS into 6 ohms
4 ohms not recommended
Power at Clipping: (typically)
(5% THD, 1 kHz, 120 V AC line)
40 W RMS into 6 ohms
Frequency Response:
at 25 W RMS into 6 ohms
Power Consumption:
Domestic: 75 watts, 50/60 Hz, 120 V AC
Export: 75 watts, 60 Hz, 220-230/240 V AC
PREAMP SECTION
are
Preamp High Gain Input:
Impedance: High-Z, 1 M ohm
Nominal Input Level: -18 dBV, 120 mV RMS
Minimum Input Level: -30 dBV, 30 mV RMS
Maximum Input Level: 0 dBV, 1 V RMS
SPECIFICATIONS
Preamp Low Gain Input:
Preamp Output:
System Hum & Noise at Nominal Input Level:
(20 Hz to 20 kHz unweighted)
Equalization:
External Footswitch Functions:
for-
Due to our efforts constant improvements,
and specifications listed herein are subject to change
5
Impedance: High-Z, 44 k ohms
Nominal Input Level: -12 dBV, 240 mV RMS
Minimum Input Level: -24 dBV, 60 mV RMS
Maximum Input Level: 6 dBV, 2 V RMS
Lead Impedance: 1 k ohm or greater
Nominal Output Level: 0 dBV, 1 V RMS
68 dB below rated power
Special low, mid, & high passive type EQ
Push Thrash: -20 dB notch at 1 kHz in Lead
channel
Push Gain: Increases Lead gain
Lead Channel Defeat (when selected with button)
Reverb Defeat
P A T E N T S AI'I'LIED FOR
without notice.