Front Panel - Peavey TRANSTUBE-Serie Bedienungsanleitung

Congratulations on your purchase of the all new Envoy 11 OTM TransTubeTM Series. This amp represents
years of research on vacuum tube emulation, resulting in a totally new Envoy. The preamp has been rede-
signed using patent-applied for technology that redefines tube-like distortion and harmonic generation in
solid-state amps.
The new T. Dynamics circuitry, also awaiting several patents, creates the long sought for tube power com-
pression phenomenon. This, when combined with the preamp circuitry, yields the closest tube amp simula-
tion to date.
To further enhance the performance of the Envoy 110 TransTube, an external speaker jack is provided along
with a preamp out jack for greater flexibility.

Front Panel:

INPUT (1)
This input will accept signals from all types of guitar pickups.
6 dB PAD SWITCH (2)
Provided for instruments that have extremely high output, which can result in overdriving (distorting) the
input gain stage. Depressing the switch to its "in" position reduces the level of the input signal by 6 dB.
CHANNEL SELECT SWITCH (3)
Allows selection of the Lead or Clean channel. The "in" position of the switch selects the Lead channel and
the "out" position selects the Clean channel.
NOTE:
Channel selection may also be achieved by the remote footswitch. If remote selection is desired, the
channel switch must be in the "in" (Lead) position.
VOLUME (4)
Controls the volume level of the Clean channel.
3