Concord eyeQ Go 2000 Bedienungsanleitung Seite 54

Tips and Troubleshooting
SYMPTOM
TAKING PICTURES/VIDEO CLIPS
Daylight
picture/video clip
taken is too dark.
Cannot take a
picture/video clip.
Image is blurred
when looking
through the
viewfinder.
Part of the picture/
video clip is
missing
POSSIBLE
CAUSE
The subject is in front
of bright light.
Memory is full.
Camera is not set to
picture/video clip
taking mode.
Power is off.
Camera is in "Auto
Power Off" mode.
Viewfinder is dirty.
Something was
blocking the lens when
taking the picture.
53
POSSIBLE
SOLUTION
Change the subject's
position.
Delete all pictures and
continue shooting.
Download photos to
your PC and delete
photos from the
camera's memory.
Insert a MMC/SD with
available memory space.
Set the unit to picture/
video clip taking mode.
Turn power on.
Turn power on.
Clean the viewfinder
with a soft cloth or
cotton swab. See the
Camera maintenance
section.
Keep hands, fingers, etc.
away from the lens.