Tv Mode - Concord eyeQ Go 2000 Bedienungsanleitung

TV Mode

The camera allows you to view individual files and record clips on the
television. To begin, check your television documentation to determine
what video standard you should set your camera to either NTSC or PAL.
MAIN MENU
Setup
Exit
Changing the TV Mode setting:
1. In the Setup menu press
2. Press to change the setting to NTSC or PAL.
Connecting to the television:
1. Connect the AV cable into the jack marked VIDEO
or VIDEO IN on your television.
2. Turn on your television.
3. Set the television to video mode according to
the instructions in the owner's manual. (This is
usually channel 3, 4 or AV).
4. Turn the camera on by pressing the Power
button.
5. Connect the other end of the cable into the
VIDEO port located underneath the cable
connection panel. (fig.6.1)
SETUP
Time-out
+
Driver
TV
PlayLogo
until TV is highlighted
47
60S
DSC
NTSC
O f f
fig.6.1