Product Specifications - Ingersoll-Rand QV20 IMPACTOOL W7150EU-K1 Benutzerhandbuch

Product Information: Cordless Impact Wrench
Product Safety Information
Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
•
serious injury. Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause
personal injury.
Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
•
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Voltage Drive
Model
V, DC Type
W7150EU 20 Square
Square
W7250EU 20
(Extended)
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An excessive
accumulation of grease will result in sluggish operation. See drawing 48380273 and table below. Maintenance frequency is shown in a circular arrow
and defined as h=hours, d=days, and m=months of actual use.
8h
1
8h
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
Product Information: Battery
Product Safety Information
Intended Use:
These batteries are used as the power source for Ingersoll Rand Cordless Products.
• Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
•
Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper disposal may endanger the environment or cause
•
personal injury.
For additional information, refer to Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Models Chemistry
BL2005 Lithium Ion
BL2010 Lithium Ion
Operating Temperatures
Rechargeable batteries give their best performance when they are operated at a normal room temperature of 59°F to 77°F (15°C to 25°C). An
excessively hot or cold battery may prevent or interrupt the battery from being charged or discharged.
Parts and Maintenance
Labels are the only User Replaceable Parts.
Models Warning Labels
BL2005 BL20-99
BL2010 BL20-99-2
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
48391619_ed3
Impacts per No Load
Minute Speed
Size bpm rpm
1/2" 2300 0-1900
1/2" x 2" 2300 0-1900
2
8h
1
Voltage (V) Capacity (Ah)
20
20
WARNING
Recommended Max.
Torque Range Torque
ft-lbs (Nm) ft-lbs (Nm) † Pressure (L
50-650 (68-880) 780 (1057)
50-650 (68-880) 780 (1057)
1
IR#
105
1 (Dwg. 48380273)
8h
WARNING
Weight (lbs (kg))
1.5 0.90(0.41)
3.0 1.52(0.69)
Sound level dB (A) Vibration (m/s²)
(EN60745) (EN60745)
) ‡ Power (L ) Level
p w
89 100 12.2
89 100 12.2
* K = Vibration measurement uncertainty
2
IR#
67
EN
*K
1.8
1.8
EN-1