Product Specifications - Ingersoll-Rand 293 Series Technische Produktdaten

Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Model(s)
293, 293-EU
293S, 293S-EU
Model(s)
293, 293-EU
293S, 293S-EU
Setting The Power Regulator
Models 293/293S-EU Impactools are equipped with a combination power regulator/reverse
valve designed to provide power adjustment while maintaining full power in the reverse
direction. Since the reverse direction is used primarily for loosening right--hand threaded
fasteners and full power is required, no provision is make for power adjustment in this
direction. The power output is calibrated by the numbers "1" through "5" stamped on the
Housing Cover Assembly.
The numbers 1 thru 5 on the housing are only for reference and DO NOT denote a
specific power output. One (1) designates the lowest power while five (5) denotes the
highest.
16581951_ed2
Drive
Style
Type
Pistol Square
Pistol Spline
Sound Level dB(A)
(ANSI S5.1-1971)
Pressure
90.3
90.3
NOTICE
Impacts
per min.
Size
1" 810
#5 810
Power
(ISO3744)
103.3
103.3
EN
Recommended
Torque Range
ft-lbs (Nm)
1000 - 1600
(1356 - 2169)
1000 - 1600
(1356 - 2169)
Vibration Level
(ISO 8662)
m/s²
12.1
12.1
EN-1