Speaker Setup For Bcs-Fs515 - Pioneer BCS-SB616 Bedienungsanleitung

Connecting
20

Speaker Setup for BCS-FS515

Preparing the speakers
For subwoofer:
Use the supplied adhesive to attach four large pads
to the base of subwoofer.
2
For front speakers:
Assembling the speaker stands and securing your
front speakers.
For vertical instllation
1. Use the supplied adhesive to attach 4 small
pads to the speaker stand base.
2. Insert the large pole from the holes behind the
base and secure with the 4 screws.
Large non-skid pads
Small non-skid pads
3. Insert the speaker cord from the hole behind
the base through to the pole and connect it to
the speaker terminal. After connecting, put the
speaker wire in the gap on the back side of the
speaker.
Match the colour-corded wire with the colour
indicator on the label, then insert the colour-
corded wire into the red (+) side and the other
wire into the black (–) side.