Inhaltsverzeichnis
Werbung
Functions of remote control
SUBCODE Sub-page key. In Teletext mode press to select
sub-pages. Some pages may be multiple in Teletext.
The sub-page key allows accessing any of these
pages directly. Press sub-page key and enter four
digits for the page you need, e.g. page 2 would be
entered as 0002. When the sub-page has been
found it will be displayed. Press the sub-page key
again to return to normal page sequence.
STOP
Stop key. In Teletext mode press to stop and start
the automatic alternation of sub-pages.
CANCEL
Interrupt key. In Teletext mode press to watch TV
while waiting for a Teletext page to be found. At this
time the number of page is flashing. When page is
found, the number stops flashing. Press the interrupt
key again to display the page.
REVEAL
In Teletext mode press to reveal hidden text (e.g.
answers). Press again to hide this text.
INDEX
In Teletext mode press to come back to the startside
of the teletext page.
P.P
Normalise key. Press to cycle through four sets of
picture settings: "Favourite", "Standard", "Soft"
and "Dynamic". The settings of "Favourite" are
adjusted in the Picture menu.
ANALOG
Direct selection of picture control.
SLEEP
Sleep Timer key. Press to set the time after which
the TV set automatically switches into standby
mode. Each pressing of the key increments the time
by 10 minutes up to 2 hours. To disable, repeatedly
press the key until the set time returns to zero. The
set time is displayed on the screen for a short time
after each key press.
STATUS
Press to display the number of current programme,
the standard of colours and sound. Press again to
display the current time (if it was entered). Press one
more time to switch off the clock display.
Note:
the Teletext functions only work in TV models with
Teletext.
20
Manual tuning
The manual tuning is only necessary if:
a) you want to tone tune a particular programme,
b) the signal of programme is weak.
The manual tuning of TV you should perform in this way:
1. Press the MENU key on the remote control two times. The menu
Install will appear on the screen.
2. With the Install menu on the screen, using the remote control key P+
or P-, highlight Manual Tune.
3. Press VOL+ or VOL- keys to start searching in the direction required.
Each time a programme is found the search will stop. Repeat until the
programme you require is found. This programme must be stored into
a memory.
4. With Install menu on the screen, using the P+ or P- keys, highlight
Store.
5. Press OK. The Install menu with highlighted Store will appear on the
screen.
6. Using the P+ or P- keys on the remote control highlight Program Pr--.
7. Using the VOL+ or VOL- keys on the remote control select required programme number
(for example, Program Pr.10).
8. Using the P+ or P- keys on remote control highlight Store and press OK. The OK will appear
on the screen to confirm a successful store.
9. Press 3 x the key MENU for leaving the Menu.
Note:
For tuning and storing other programs, you should press the MENU key and repeat steps
from 2 to 8.
Automatic switching on and off
1. Press the MENU key on the remote control 3 times. The menu Setup
will appear on the screen. Using the P+ and P- keys, highlight Timer.
2. Press OK. The menu Time will appear on the screen. Using the VOL+
and VOL- keys enter the correct time. The hours (00 to 23) are set
by using VOL-, and the minutes (0 to 59) - by using VOL+.
3. Using the P+ or P- keys, highlight On Timer, and using the VOL- and
VOL+ keys enter the time, at which you want TV set to switch ON from
standby.
4. Using the P+ or P- keys, highlight Off Timer, and using the VOL- and
VOL+ keys enter the time, at which you want TV set to switch to
standby from ON.
5. Using the P+ or P- keys, highlight On Timer Pr--, and using the VOL-
and VOL+ keys enter the number of programme which you want TV
to turn on.
Install
Auto Tune
Manual Tune
Fine Tune
Store
Program Pr--
Store
Setup
Timer
Organize
Function
Language
Time
--:--
On Timer --:--
Off Timer --:--
On Timer Pr --
17
Werbung
Inhaltsverzeichnis
