Honeywell FENZY BIOLINE Bedienungsanleitung Seite 6

Checks
The operation of the apparatus must be checked every time it is assembled/dismantled or if any spare parts are changed.
Checking or maintenance operations must be carried out by technicians authorised by HONEYWELL RESPIRATORY SAFETY
PRODUCTS, having an inspection bench, special tools and original HONEYWELL RESPIRATORY SAFETY PRODUCTS parts, as well
as the maintenance procedures.
Storage
After they are cleaned and dried, compressed-air breathing apparatuses may be stored in a suitable cabinets or boxes.
Make sure that the apparatus is placed on the support plate and that the straps are not folded.
Compressed-air breathing apparatuses must be stored in a cool place. The storage area must be dry and free of any emission of gas or
fumes. Avoid exposure to direct and significant light or sunlight and keep away from sources of thermal radiation.
The recommended apparatus storage temperature must range from +5° C to +45° C:
For special storage conditions (under outdoor shelters etc.), please contact our technical department.
ACCESSORIES
•
TESTAIR III electronic inspection bench:
•
Inspection accessory:
•
Storage case for the apparatus:
•
Compressed air supply pipe:
REFERENCES DESCRIPTION
1824551 COMPRESSED AIR SUPPLY PIPE WITH CEJN COUPLING AND NIPPLE, LENGTH 10m
1824552 COMPRESSED AIR SUPPLY PIPE WITH CEJN COUPLING AND NIPPLE, LENGTH 20m
1824553 COMPRESSED AIR SUPPLY PIPE WITH CEJN COUPLING AND NIPPLE, LENGTH 40m
1824537 COMPRESSED AIR SUPPLY PIPE WITH AQR06 COUPLING AND NIPPLE, LENGTH 10m
1824538 COMPRESSED AIR SUPPLY PIPE WITH AQR06 COUPLING AND NIPPLE, LENGTH 20m
1824539 COMPRESSED AIR SUPPLY PIPE WITH AQR06 COUPLING AND NIPPLE, LENGTH 40m
1824540 COMPRESSED AIR SUPPLY PIPE WITH RBE06 COUPLING AND NIPPLE, LENGTH 40m
1824541 COMPRESSED AIR SUPPLY PIPE WITH RBE06 COUPLING AND NIPPLE, LENGTH 10m
1824542 COMPRESSED AIR SUPPLY PIPE WITH RBE06 COUPLING AND NIPPLE, LENGTH 20m
These pipes are heat-resistant (marked 'H'), antistatic (marked 'S') and flame-resistant (marked 'F')
SPARE PARTS
The spare parts of the device are presented using exploded views in the spare parts price list (price and part number), which is available
on request.
SUPPORT AND TRAINING
All HONEYWELL RESPIRATORY SAFETY PRODUCTS apparatuses are designed to allow maintenance by the users, but that requires
a minimum level of skills and the use of appropriate equipment.
Training courses may be organised on the customer's premises or in our own training establishments.
The full programme of training courses for device maintenance is available on request.
HONEYWELL RESPIRATORY SAFETY PRODUCTS markets an electronic inspection bench to guarantee the quality of the work done.
For more information, please contact the HONEYWELL RESPIRATORY SAFETY PRODUCTS technical assistance department.
LIMIT OF MANUFACTURER'S GUARANTEE
In accordance with HONEYWELL RESPIRATORY SAFETY PRODUCTS specifications, checks and maintenance operations must be
performed by personnel qualified and authorised by HONEYWELL RESPIRATORY SAFETY PRODUCTS. Only original inspection
benches, special tools and spare parts may be used. The recommendations relating to the frequency of testing and maintenance
described in these instructions must be followed.
Only apparatuses from HONEYWELL RESPIRATORY SAFETY PRODUCTS with their valves and masks are covered by the CE
configuration certification.
As a result, this guarantee does not cover apparatuses used with components other than those supplied or replaced by HONEYWELL
RESPIRATORY SAFETY PRODUCTS.
On request
On request
On request
On request (see list below)
EN-4