Gewiss GW 10 703 Bedienungsanweisung Seite 34

USER INSTRUCTIONS
Setting parameters
Activating self-learning (heating operating type only)
When the
vate (OFF) the function using the
Press the MODE key within 30 seconds to confirm the
value set.
Self-learning is used to optimise the advance (max. 2
hours) for activating the heating.
The time-thermostat manages the advance automati-
cally, so as to guarantee the set temperature at the be-
ginning of every period of the programmed profile.
This function is activated in heating, in automatic oper-
ating mode only.
Setting the differential regulation value
When the
ulation value using the
Press the MODE key within 30 seconds to confirm the
value set.
This value is differentiated by operation type (heating/
air conditioning) and represents the displacement be-
tween the set point set and the actual activation tem-
perature.
It is recommended to retain the preset values except in
special situations.
34
symbol appears, activate (ON) or deacti-
symbol appears, set the differential reg-
keys.
keys.