Battery; Charging The Battery; Battery Level; Battery Charging Information - Mixplast Magic Stapler Gewährleistung Und Gebrauchsanweisung

Uses

Charging the battery:

Before each use, it is advised that the battery is charged for 16 hours in order to maximise battery life and achieve optimum perfor-
mance.
The battery reaches its full capacity after various charging cycles.
How to charge the battery :
■ Place in a cool, dry enviroment, away from any products which may be flammable.
■ Plug the charger into (rep8) as indicated in diagram 1.
■ switch on the charger.
■ once charged, unplug the charger.

Battery level

The LED lights which indicate the battery level (Rep6) come on automatically when the battery is powered on.
if the battery level becomes too low, the battery level Led keeps flashing and the trigger (rep5) is inhibited.
nb: With a fully charged battery, when the unit is unused, the total discharge occurs within 28 days .

Battery charging information:

Charging begins as soon as the charger is plugged in. It goes through 2 stages : charging and maintaining charge.
The table below indicates the LED activity according to the battery level and stages of charge.
During charging
Once charging is complete (maintaining charge)
Sypnotic table: Power settings
the power of the current depends on which of the 6 different levels chosen using buttons (rep9) « + » and « - ». the setting chosen
will appear on the screen (Rep7):
Level LED1
1 ON
2 ON
3 ON
4 ON
5 ON
6 ON
Should you have any questions, please do not hesistate to contact us via email : mixplast@mix.fr
■ the trigger (rep5) and buttons (rep9) + and - are inhibited,
■ battery level Led (rep6) flashes repeatedly (quick flashing
≈ 1second)
■ the trigger (rep5) and buttons (rep9) + and - are inhibited,
■ battery level Led (rep6) stops flashing, but remains alight as
it maintains charge.
LED2 LED3
ON
ON ON
ON ON
ON ON
ON ON
LED4 LED5
ON
ON ON
ON ON
EN
Page 2
LED6
ON