Operate Gemini Utilities; Start Gemini Utilities; Change The Autoloader Display Name; Enable The Beeper - Rimage Producer III 6100 Benutzerhandbuch

Operate Gemini Utilities

The Rimage Producer Software Suite includes an application called Gemini Utilities, which is used to change the display
name of the Producer III and to enable the beeper.
Tip: To access Gemini Utilities for the Producer 6100N, 7100N or 8100N, use the remote desktop connection from a
networked PC, or connect a monitor, keyboard, and mouse to the Producer 6100N, 7100N or 8100N.

Note: Unless otherwise indicated, all Windows navigation statements are Windows XP paths. Windows Vista, Windows
2000 and Windows Server 2003 navigation may differ slightly.

Start Gemini Utilities

Close all open software applications and stop all
1.
Rimage Services.

Note: Refer to your Rimage Software online
help for additional information.
From the Windows Start menu select: All
2.
Programs > Rimage > Utilities > Gemini Utilities.
Gemini Utilities opens.
 Note: When the desired tasks are complete
in Gemini Utilities, start the Rimage
Services.

Change the Autoloader Display Name

Use Gemini Utilities to enter the name displayed on the operator panel.
Select the Override Name checkbox.
1.
Clear the Use Computer Name checkbox.
2.
In the Display Name field, enter the new name.
3.
Select Set Params to set the name.
4.
Select Exit to close Gemini Utilities.
5.

Enable the Beeper

You can change the number of beeps that occur when the system is out of media or there is an error.
1. In the # of Beeps on Fault field, select the number of beeps you wish to hear when there is an error.
Tip: To disable the beeper, set the number to zero.
2. Select Set Params to set the number of beeps.
Select Exit to close Gemini Utilities.
3.
2001475_A
Operate Gemini Utilities
23