Operate Gemini Utilities; Starting Gemini Utilities; Changing The Autoloader Display Name; Enabling The Beeper - Rimage Producer 7100N Benutzerhandbuch

Rimage Producer III™ and Producer IIIN™ User Guide

Operate Gemini Utilities

Producer Software Suite includes an application called Gemini Utilities, which is used to update the autoloader
firmware. You can also use Gemini Utilities to change the display name of the Producer III and to enable the beeper.
Tip: To access Gemini Utilities for the Producer IIIN, use the remote desktop connection from a networked PC,
or connect a monitor, keyboard, and mouse to the Producer 7100N or Producer 8100N.

Starting Gemini Utilities

1. Close all open applications and stop all Rimage Services.
Note: Refer to your Rimage Software online help for additional information.
2. Navigate: Star t > Programs > Rimage > Utilities > Gemini Utilities. Gemini Utilities o
Note: When the desired tasks are complete, start the Rimag

Changing the Autoloader Display Name

Use Gemini Utilities to enter the name displayed on the operator panel.
1. Select the Override Name checkbox. Ensure that the
2. In the Display Name field, enter the new name.
3. Select Set Params to update the firmware with the new name.

Enabling the Beeper

You can change the number of beeps that occur when there is an error.
1. In the # of Beeps on Fault field, select the number of be
Tip: To disable the beeper, set the num
2 . Select Set Params to update the firmware.
16
e Services.
Use Computer Name checkbox is not selected.
eps you wish to hear when there is an error.
ber to zero.
pens.
2000538_A