Sending Robot To The Charging Station - Blaupunkt BLUEBOT XSMART Benutzerhandbuch

Intensive N/A Press four times
Cleaning on MODE on
mode the remote
control. Choose
Mode- 4.
* Depending on the robot's status
** Only works when the robot is in Standby
Table 11 - Activating the cleaning modes explained for different control types
6.4

Sending robot to the charging station

When the robot is finished with the cleaning cycle, it will automatically
return to the charging station. The robot will also return to the charging
station when the battery is low.
Table 12 shows the commands per control type for sending the robot to
the charging station.
Press HOME Press HOME
Tap on "Re-charge" in
the Operation screen
Table 12 - Sending robot to the charging station
Tap on EN: Alexa, ask Bluebot
OPERATION.
to start intensive
Select cleaning
INTENSIVE. DE: Alexa, starte
Intensiv-Reinigung mit
Bluebot
EN: "Alexa, ask Bluebot to
start charging"
DE: "Alexa, lade den Bluebot
auf"
When the robot has returned to the charging station, you can turn your
robot off or put the robot in Standby mode or to sleep. After 60 seconds
the robot automatically enters sleep mode.
•
Standby means the robot has its power switched on and is waiting for
the user's operation.
•
Sleep means power-saving mode.
When the robot has returned to the charging station and the charging
station is connected to the mains supply, charging will start. For more
information about charging, see section 5.6.
EN
63