Modifying The Direction Of Rotation - Somfy Oximo Rts Gebrauchsanleitung

Oximo RTS
5.4.3 With flexible connections and stops on the end
slat
If the roller shutter is fitted with flexible connections and
stops on the end slat, the upper end limit is automatically
adjusted whereas the lower end limit may be modified.
Setting the lower end limit
1) Lower the roller shutter to the set lower end limit
position.
2) Press the up and down buttons simultaneously until the
roller shutter moves up and down using the up and down
buttons.
3) Adjust the lower position of the roller shutter using the up
or down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new lower end limit position has been
programmed.
5.4.4 With flexible connections and without stops on
the end slat
If the roller shutter is fitted with flexible connections but
without stops on the end slat, the lower and upper end limits
may be modified.
Setting the upper end limit
1) Raise the roller shutter to the set upper end limit position.
2) Press the up and down buttons until the roller shutter
moves up and down.
3) Adjust the upper position of the roller shutter using the up
or down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new upper end limit position has been
programmed.
Setting the lower end limit
1) Lower the roller shutter to the set lower end limit position.
2) Press the up and down buttons until the roller shutter
moves up and down.
3) Adjust the lower position of the roller shutter using the up
or down buttons.
4) Press the STOP/my button until the roller shutter moves
up and down:
The new lower end limit position has been
programmed.

5.5 Modifying the direction of rotation

Caution! Any modification to the installation (removing the
connections or bolts, removing the motor from the roller
tube, etc.) requires the original motor settings to be resto-
red and complete installation of the motor to be carried out
again as set out in the section entitled "Installation".
The direction of rotation may be modified at any time:
1) Place the roller shutter in any position: the roller shutter does not
need to be in the upper or lower end limit position.
2) Press the up and down buttons until the roller shutter
moves up and down.
3) Press the STOP/my button until the roller shutter moves
up and down a second time:
The direction of rotation has been modified.
4) Press the up button to check the new direction of
rotation.
52
1
3
or
1
3
or
1
3
or
1
3
X2
Copyright © 2008-2009 Somfy SAS. All rights reserved.
2
4
2
4
2
4
2
4