4.3.4 With flexible connections and without stops on
the end slat
If the roller shutter is fitted with flexible connections (I) but
without stops on the end slat (H), the lower and upper end
limits must be adjusted using the control point.
Setting the lower end limit
1)
Place the roller shutter in the required lower end limit
position.
-
If necessary, adjust the position of the roller shutter
using the up or down buttons.
2)
Press the STOP/my and up buttons simultaneously:
The roller shutter is raised in one continuous move-
ment even after the STOP/my and up buttons have
been released.
3)
Raise the roller shutter until it reaches mid-height.
4)
Briefly press the STOP/my button to stop the roller shut-
ter moving and continue by adjusting the upper end limit.
Setting the upper end limit
1)
Place the roller shutter in the required upper end limit
position.
-
If necessary, adjust the position of the roller shutter
using the up or down buttons.
2)
Press the STOP/my and down buttons simultaneously:
The roller shutter is lowered in one continuous move-
ment even after the STOP/my and down buttons
have been released.
3)
Lower the roller shutter until it reaches mid-height.
4)
Briefly press the STOP/my button to stop the roller shut-
ter moving.
5)
Press the STOP/my button again until the roller shutter
moves up and down:
The end limit positions have been programmed.
6)
Press the RTS control point PROG button to program the
first control point:
The roller shutter moves up and down briefly.
4.4 Checking the settings
-
Check the setting of the upper and lower end limits using
the RTS control point.
5. Optional specific settings
5.1 Favourite position
5.1.1 Definition
The Oximo RTS motor is supplied with a pre-program-
med favourite position which corresponds to almost
complete closure of the roller shutter (slats in sun protection
position).
5.1.2 Activating the favourite position
-
Carry out 2 complete roller shutter up and down cycles up
to the upper and lower end limits to activate the favourite
position.
Copyright © 2008-2009 Somfy SAS. All rights reserved.
I
H
1
2
or
3
4
1
2
or
3
4
5
6
PROG.
Oximo RTS
49