SOMFY Oximo RTS Gebrauchsanleitung Seite 50

Oximo RTS
4.3.2 With bolts and without stops on the end slat
If the roller shutter is fitted with bolts (F) but without stops on
the end slat (H), the lower end limit is automatically adjus-
ted whereas the upper end limit must be adjusted using the
control point.
Setting the upper end limit
1) Place the roller shutter in the required upper end limit
position.
- If necessary, adjust the position of the roller shutter
using the up or down buttons.
2) Press the STOP/my and down buttons simultaneously:
The roller shutter is lowered in one continuous move-
ment even after the STOP/my and down buttons
have been released.
3) Lower the roller shutter until it reaches mid-height.
4) Briefly press the STOP/my button to stop the roller shut-
ter moving.
5) Press the STOP/my button again until the roller shutter
moves up and down:
The end limit positions have been programmed.
6) Press the RTS control point PROG button to program the
first control point:
The roller shutter moves up and down briefly.
4.3.3 With flexible connections and stops on the end
slat
If the roller shutter is fitted with flexible connections (I) and
stops on the end slat (G), the upper end limit is automati-
cally adjusted whereas the lower end limit must be adjusted
using the control point.
Setting the lower end limit
1) Place the roller shutter in the required lower end limit
position.
- If necessary, adjust the position of the roller shutter
using the up or down buttons.
2) Press the STOP/my and up buttons simultaneously:
The roller shutter is raised in one continuous move-
ment even after the STOP/my and up buttons have
been released.
3) Raise the roller shutter until it reaches mid-height.
4) Briefly press the STOP/my button to stop the roller shut-
ter moving.
5) Press the STOP/my button again until the roller shutter
moves up and down:
The end limit positions have been programmed.
6) Press the RTS control point PROG button to program the
first control point:
The roller shutter moves up and down briefly.
48
F
1
or
3
5
I
1
or
3
5
Copyright © 2008-2009 Somfy SAS. All rights reserved.
H
2
4
6
PROG.
G
2
4
6
PROG.