Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Epson HDBaseT ELPHD01 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HDBaseT ELPHD01:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34
The remote control
does not work
Cannot
communicate
(Cannot control
from the LAN, RS-
232 In, or Wired-IR
In ports)

Specifications

HDBaseT port
Supported output
signals (HDBaseT)
HDMI In port
HDMI input signals VGA/SVGA/XGA/WXGA/WXGA+/WXGA++/WSXGA+/
Is the remote control cable connected correctly?
Check that the remote control cable is securely
connected to the connectors on the remote control and
this device.
Do the remote control ID and the projector ID match?
Make sure the ID for the projector you want to operate
and the ID for the remote control match.
Is a remote control from another company connected?
Remote controls from other companies are not
supported.
Is the device ready to communicate?
See the following entry "Cannot communicate".
Is the HDBaseT function enabled for the connected
projector?
Check the projector's settings.
Has the device entered sleep mode?
In sleep mode, the device cannot be controlled from
the RS-232 In or Wired-IR In ports. Set the [Sleep
Mode] switch to [Disable].
Was the power turned on/off or a cable connected or
disconnected during communication?
A communication error occurs if the power or the signal
is disrupted during communication.
RJ45/Cable length 100 m (328 feet) maximum
HDMI (Video, Audio)/RS-232 (for control)/Wired IR
(Remote Control)/LAN (for control)
HDMI HDCP supported (only PCM supported for
audio)/Cable length 3 m (9.8 feet) maximum
SXGA/SXGA+/UXGA/WUXGA/SDTV(480i/480p)/
SDTV(576i/576p)/HDTV(720p)/HDTV(1080i)/
HDTV(1080p)
* Varies depending on the connected projector. For
more details, see the projector's "User's Guide".
20

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis