Epson HDBaseT ELPHD01 Bedienungsanleitung Seite 14

•
When moving the device, make sure you turn off the power, unplug
the power cable from the electrical outlet, and disconnect any
wiring before moving.
Otherwise, a fire or electric shock could occur.
•
Do not install the device in a location subject to humidity or dust
such as a kitchen counter or near a humidifier, or in a location
subject to smoke or steam.
Otherwise, a fire or electric shock could occur.
•
Do not install the device in the following locations.
• On a carpet, a bed, a blanket, and so on.
• Do not cover it with a blanket, curtain, tablecloth, and so on.
•
Do not place it on a surface that is slanted or unstable.
Otherwise, it could fall and cause an injury.
•
When maintaining the device, do not use a wet cloth or solvents
such as alcohol, benzene, or thinner.
Otherwise, an electric shock or malfunction could occur.
•
Do not sit on this device, or place heavy objects on this device.
Otherwise, an injury could occur.
•
When maintaining the device, make sure you unplug the power,
unplug the power cable from the electrical outlet, and disconnect
any wiring before performing maintenance.
Otherwise, an electric shock could occur.
•
For safety reasons, when not using this device, make sure you
unplug the power cable from the electrical outlet.
If the insulation has degraded, a fire could occur.
Trademarks and Copyrights
HDMI and High-Definition Multimedia Interface are the trademarks or
registered trademarks of HDMI Licensing LLC.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT
Alliance.
Other product names used herein are also for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and
all rights in those marks.
©SEIKO EPSON CORPORATION 2013. All rights reserved.
Caution
14