Epson HDBaseT ELPHD01 Bedienungsanleitung Seite 21

LAN port
RS-232 In port
Wired-IR In port
Power supply
(AC adapter)
Power (ELPHD01) 11 VDC
Power
consumption
Operating
environment
Storage
environment
Dimensions
(W x H x D)
Mass
Items Included
Wiring for the RS-232 In Port
Use an RS-232C cross cable.
•
Signal name
Connector
•
Communications protocol
Default baud rate setting: 9,600 bps, Data length: 8 bit, Parity: None, Stop-
bit: 1 bit, Flow control: None
RJ45 (100Base-TX only)
Mini D-Sub 9 pin (male)/Cable length 5 m (16.5 feet)
maximum (cross cable)
Stereo mini jack (3.5 Φ)/Cable length 20 m (65.6 feet)
maximum
100 to 240 V AC ±10% 50/60 Hz
Operating: 6 W
Standing by: 0.48 W
Temperature: +5 to +35°C (41 to 95 °F)
Humidity: 20 to 80% (no condensation)
Temperature: -10 to +60°C (14 to 140 °F)
Humidity: 10 to 90% (no condensation)
102 x 25 x 102 mm (4 x 1 x 4 inches); not including
projecting parts
Approx. 280 g
HDBaseT Transmitter, AC adapter, power cable, earth
wire
Pin Signal Name
2 RD
3 TD
5 GND
21
Function
Receive data
Transmit data
Signal wire ground