Panasonic AW-RP50E Bedienungsanleitung Seite 14

Parts and their functions
 EXIT button [EXIT]
Press this during menu operations to return to the
previous hierarchical level.
 USER buttons [USER1, USER2]
The functions of some of the setting items on the
menus can be assigned to [USER1] and [USER2]
to be recalled later.
 Refer to "Setting the USER buttons" (<Operations
and Settings> Operating Instructions).
 MENU button [MENU]
Press this to recall the menus using the PRESET
MEMORY/MENU buttons ().
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The menu operations take effect.
Button indicator OFF:
The menu operations have no effect.
 Refer to "Basic operations for the menus".
 PAGE button [PAGE]
Press this to specify the preset memory of the
remote camera.
When the button is pressed, its indicator lights,
and the mode for selecting the page of the preset
memory is established.
In this mode, press one of the PRESET MEMORY/
MENU buttons (), and specify the page number.
Next, specify the number on the page using one of
the PRESET MEMORY/MENU buttons.
 Refer to "Setting and operating the preset
memories" (<Operations and Settings>
Operating Instructions).
 STORE button [STORE]
Press this to register the preset memory data of the
currently selected remote camera.
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data registration mode is
established.
Button indicator OFF:
The preset memory data registration mode is
released.
 Refer to "Setting and operating the preset
memories" (<Operations and Settings>
Operating Instructions).
 DELETE button [DELETE]
Press this to delete the preset memory data for the
currently selected remote camera.
When it is pressed again while its indicator is lit, the
menu is cleared, and the indicator goes off.
Button indicator ON:
The preset memory data deletion mode is
established.
Button indicator OFF:
The preset memory data deletion mode is
released.
 Refer to "Setting and operating the preset
memories" (<Operations and Settings>
Operating Instructions).
 PRESET MEMORY/MENU buttons
[PRESET MEMORY/MENU]
Use these buttons to recall the preset memory data
and recall menus.
 CAMERA STATUS/SELECTION buttons
[CAMERA STATUS/SELECTION]
Use these buttons to select up to five remote
cameras.
Button indicator ON:
The corresponding remote camera is selected.
Button indicator OFF:
The selection of the corresponding remote
camera is released.
Using the menu, up to 100 remote cameras can
be divided into 1 to 20 groups, and then registered
and controlled. The statuses of the remote cameras
assigned to buttons 1 to 5 can be identified using
the indicators positioned above the buttons.
 Refer to "Selecting the remote cameras to be
operated".
 ZOOM button [ZOOM]
Use this to adjust the lens zoom.
When the TELE end is pressed:
Telephoto setting
When the WIDE end is pressed:
Wide-angle setting
The zooming speed changes depending on the
extent to which the button is pressed.
13 (E)