Starting The Keep Warm Function When In Standby Mode; Pouring The Water - hanseatic WK8315JEEK Gebrauchsanleitung

Page EN-18 Operation
Starting the keep warm
function when in standby
mode
1. Press the button when in
standby mode.
2. Set the desired keep warm
temperature as described in
the previous section.
If the actual water temperature
is below the set value, the ket-
tle will heat the water until the
set value is reached. When the
heating process is completed,
the kettle switches to the keep
warm function for 40 minutes.
3. To switch off the keep warm
function, press the
button.

Pouring the water

1. Use the handle (4) to lift the
kettle off the base (6).
2. With the lid closed, pour the
heated water through the
spout (1) and into your chosen
container.
• If you want to heat more
water, allow the appliance to
cool off for 30 seconds.
• If you do not want to heat
any more water, pull the
mains plug out of the socket.
Empty the kettle after
each use. Otherwise, the
or
kettle will calcify more quickly
and the water will become murky
if not used for an extended
period.