Technical Support - Siemens SITRANS P III serie Bedienungsanleitung

Certificates and approvals
Connection "nL"
Effective inner capacitance:
Effective inner inductance:
● Explosion protection in accordance
with FM
Designation (XP/DIP) or IS; NI; S
Permissible ambient temperature
Entity parameters
● Explosion protection as per CSA
Designation (XP/DIP) or (IS)
Permissible ambient temperature
Entity parameters
Appendix A
Certificate
The certificates can be found on the enclosed CD and on the Internet under:
Certificates (http://www.siemens.com/processinstrumentation/certificates)

Technical support

Technical Support
You can contact Technical Support for all IA and DT products:
● Via the Internet using the Support Request:
Support request (http://www.siemens.com/automation/support-request)
● E-mail (mailto:support.automation@siemens.com)
● Phone: +49 (0) 911 895 7 222
● Fax: +49 (0) 911 895 7 223
Further information about our technical support is available in the Internet at
Technical Support (http://www.siemens.com/automation/csi/service)
SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-01, 08/2011
HART
U = 45 V
n
C = 6 nF
i
L = 0.4 mH
i
Certificate of Compliance 3008490
CL I, DIV 1, GP ABCD T4 ... T6; CL II, DIV 1, GP EFG; CL III; CL I, ZN 0/1 AEx ia
IIC T4 ... T6; CL I, DIV 2, GP ABCD T4 ... T6; CL II, DIV 2, GP FG; CL III
T = T4: -40 ... +85°C (-40 ... +185°F)
a
T = T5: -40 ... +70°C (-40 ... +158°F)
a
T = T6: -40 ... +60°C (-40 ... +140°F)
a
As per "control drawing"
A5E00072770A:
U = 30 V, I = 100 mA,
i i
P = 750 mW, R = 300 Ω,
i i
C = 6 nF, L = 0.4 mH
i i
Certificate of Compliance 1153651
CL I, DIV 1, GP ABCD T4 ... T6; CL II, DIV 1, GP EFG; CL III; Ex ia IIC T4 ... T6:
CL I, DIV 2, GP ABCD T4 ... T6; CL II, DIV 2, GP FG; CL III
T = T4: -40 ... +85 °C (-40 ... +185 °F)
a
T = T5: -40 ... +70 °C (-40 ... +158 °F)
a
T = T6: -40 ... +60°C (-40 ... +140°F)
a
As per "control drawing" A5E00072770A:
U = 30 V, I = 100 mA, P
i i
PROFIBUS PA or Foundation Fieldbus
FISCO supply unit
U = 32 V, I
i
C = 1.1 nF
i
L = 7 µH
i
As per "control drawing"
A5E00072770A:
U = 17.5 V, I
max
P = 5.32 W,
max
C = 6 nF, L
max
= 750 mW, R = 300 Ω, L
i i
= 515 mA, P = 5.25 W
i i
= 380 mA,
max
= 0.4 mH
max
= 0.4 mH, C = 6 nF
i i
47