CAME BPT TA/350 Montageanleitung Seite 38

E
N.B. After 15 seconds of inactivity, the unit automatically exits the procedure, storing the
last data set.
N.B. Each time the
by one unit. If they are held down, the digits on the display move slowly for the first five
seconds, then faster.
Choosing a temperature management program
A
B
TA350
buttons are pressed, the digits on the display decrease or increase
Press the button to finish the time and
day setting procedure E.
The colon between the hours and minutes
will flash confirming the operation has been
completed.
The button allows you to choose from 3
different programmed temperature levels,
according to the operating mode.
In Heating mode.
Comfort 20.0 °C
18.0 °C
Eco
16.0 °C
Night
In Cooling mode.
Comfort 24.0 °C
26.0 °C
Eco
28.0 °C
Night
Once you have made your choice, the display
shows the name of the selected program
for 2 seconds, then the temperature as-
sociated with the program for another 2
seconds and finally goes back to showing
the temperature.