Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Philips Respironics DreamWisp Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

6. Headgear (top strap): Slide the tabs into the slots on the mask frame and
fold backwards.
7. Headgear (bottom strap): Slide the tabs into the slots on the magnetic
clips and fold backwards.
8. Fabric sleeves: Wrap the sleeves around the mask frame and press the
strips together.
Note:
The sleeve seams should be on the outside of the frame.
Disassembly
1. Tubing quick release: Pull the tubing quick
release from the elbow.
2. Elbow: Pull the elbow from the top of the frame
18
size connector.
3. Fabric sleeves: Undo the strips and remove from
the mask frame.
4. Headgear (bottom strap): Undo the headgear
tabs and pull through the slots in the magnetic
20
clips.
5. Headgear (top strap): Undo the headgear tabs
and pull through the slots in the mask frame.
6. Magnetic clips: Pull the front end of the magnetic
clip away from the back circular end of the clip to
disconnect the magnets.
back and out of the mask frame bottom slot. You
may need to flex the mask frame for easier
removal.
7. Sizing connector: Disconnect the mask frame
tubes from the sizing connector.
8. Cushion: Pull the cushion from the mask frame.
23
7 Health Care Provider & Clinician Information
Useful Life
The useful life of the DreamWisp nasal mask depends on the use conditions and maintenance
(cleaning, institutional disinfection, and component replacement) of the device. Inspect the mask
parts regularly for damage or wear. Replace components as deemed necessary.
Multi-Patient Use
Clean and disinfect the mask daily and between patients when in use in a clinical setting. Refer
to the Disinfection Guide for Professional Users to reprocess between patients in a clinical
setting. Access the latest version of the Disinfection Guide at www.healthcare.philips.com or by
contacting customer service at 1-800-345-6443 (USA or Canada only) or +1-724-387-4000.

Specifications

The technical specifications of the mask are provided for your healthcare professional to
determine if it is compatible with your CPAP or bi-level therapy device.
Warning:
Use outside of these specifications may result in ineffective therapy The pressure
flow curve shown below is an approximation of expected performance. Exact measurements may
vary.
17
17
18
19
Push the circular end
18
20
20
22
5
17
19
21
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis