Inhaltsverzeichnis
Werbung
Adjusting the Mask
1. Peel the top headgear tabs away
from the fabric. Evenly adjust the
length of the straps. Press the tabs
back against the fabric to reattach.
2. Peel the bottom headgear tabs
away from the fabric. Evenly adjust
the length of the straps. Press the tabs back against the
fabric to reattach.
3. Position the mask until it fits comfortably.
4. When finished, the elbow should rest at the top of the
head. The cushion should rest comfortably on your face
without blocking your nostrils.
Sizing Connectors
The mask frame with medium sizing connector will comfortably fit most faces. If the frame with medium
sizing connector does not fit your face, contact your health care provider to see if a small (SM) or
large (LG) sizing connector would better suit your needs.
Tip:
If the mask frame falls backward and is too close to your ears, you may need a smaller
sizing connector.
Tip:
If the mask frame falls forward on the head and is too close to your eyes, you may need a
larger sizing connector.
Using the Mask
1. Connect the CPAP tubing (included with the CPAP device) to the tubing
quick release on the elbow.
2. Turn the therapy device on. Lie down. Breathe normally.
3. Assume different sleeping positions. Move around until comfortable. If there
are any excessive air leaks, make final adjustments. Some air leaking is
normal.
Tubing Quick Release
The elbow is equipped with a tubing quick release. Pull on the tubing quick release and it will
disengage from the elbow and come loose with the tubing.
9
3
9
10
Werbung
Inhaltsverzeichnis
