Taking The Appliance Into Use - Silvercrest KH 205 Bedienungsanleitung

Taking the appliance into use

Take the appliance out of the carton and remove all packaging
materials.
Inserting the batteries in the receiver
Open the battery compartment i on the rear of the
appliance.
Insert 2 x 1.5V batteries of the type "AA/Mignon/LR6"
as per the insertion markings shown in the battery com-
partment i.
Replace the battery compartment cover a.
The appliance now switches automatically into the syn-
chronisation mode. Press the synchronisation button on
the receiver w to provisionally leave this mode.
Inserting the battery in the sender
Remove the assembly plate j from the sender.
Insert a 12 V battery, Type 23A as per the insertion
markings shown in the battery compartment g.
Pay attention to correct poling of the batteries, otherwise the
appliance will not function and could even be damaged.
Should the performance of the appliance diminish or fall
away completely, it means the batteries are exhausted.
The used batteries should then be changed for new ones
of the same type.
- 48 -