Storing The Dispenser; Repairs; Troubleshooting - Maitre de Vin P140037 Bedienungsanleitung

ATTENTION: NONE OF ThE PARTS ARE
DISwAShER PROOF!

STORINg ThE DISPENSER

• When the dispenser is not to be used for a
long period of time, turn the main switch (15)
off and pull out the plug (16).
• Before storing the appliance, rinse the
system with fresh water and let it dry out
(see: 'Cleaning the Tube System').
• Store the appliance in a dry place out of the
reach of children.
• Protect the appliance from dust and dirt.

TROUBlEShOOTINg

PROBlEm
1. The Wine Dispenser does
not turn on.
2. The Wine Dispenser turns on
but an individual chamber is
not working.
3. LED light (Fig. 2) is flashing.
lCD Display (Fig. 4)
4. Nothing is displayed on the
LCD Display (1).
P140037-WineDispenser-2014_10_24_English.indd 17

REPAIRS

• Should a breakdown, fault or suspected fault
occur, immediately pull out the plug.
• Never operate a faulty appliance.
• All servicing and repairs must be carried out
by an authorized service center.
• The manufacturer will not be liable for any
injury or damage to persons and/or property
caused by the appliance malfunctioning,
should repairs not be performed by an
authorized service center.
RECOmmENDED STEPS
- Ensure the Wine Dispenser is
plugged into the outlet.
- Ensure that the outlet has
power.
- Ensure the main power switch
(15) is "ON".
- Ensure the individual chamber
main switch (6) is "ON" (Fig. 1).
- Ensure the individual chamber
main switch (6) is "ON" (Fig. 1).
- Open and Close the glass door
(3) to reset (Fig. 3).
- Remove the locking piston
assembly (17) (Fig. 3), wash it
thoroughly and then replace.
- Ensure that the main power
switch (15) is on and there is
power to the machine.
FIgURE
Individual chilling
chamber main switch
Fig. 1
LED light
Fig. 2
Locking piston assembly
Fig. 3
Glass
door
LCD
Display
Fig. 4
17
24/10/2014 2:38 PM