Preserving The Wine; Selecting The Temperature - Maitre de Vin P140037 Bedienungsanleitung

pushing it all the way in. The wine bottle
should be held up through the locking piston
and if inserted properly, its bottom will not
rest at the base of the cooling chamber.
• Push the dispensing head (2) down until it
clicks into place (10J)(11K).
• Close the cooling chamber door (3).
• After the bottle is installed and the door is
closed, the LED light above the lever (9)
blinks while the machine is going through its
wine preservation process, removing oxygen
from the bottle using a vacuum pump.
• The LED light will stop blinking and will
remain lit once the wine has reached its
optimal preservation stage.

PRESERVINg ThE wINE

The dispenser includes a system that creates a
vacuum inside the wine bottles to preserve the
wine by avoiding oxidation.
• When inserting a bottle inside the wine
chamber, the machine will automatically
trigger the wine preservation cycle. The LED
light above the lever (9) will blink until the
preservation process is completed.
• Each time wine is dispensed, the air vacuum
inside the bottle will be interrupted.
• To re-engage the wine preservation process,
the following two options are available:
- Automatic Preservation:
The machine will remove oxygen from
the bottle and automatically starts the
preservation process 30 min after the last
glass was dispensed.
- Manual Preservation:
On the control panel (7), press the 'Preserve'
button (7-a).
The preservation mode will then begin.
The unique vacuum technology can preserve
white wine for 5 to 7 days and red wine for 7 to
10 days.
P140037-WineDispenser-2014_10_24_English.indd 13

SElECTINg ThE TEmPERATURE

The amount of time needed for the wine
dispenser to chill the wine to the desired
temperature will depend on the type of
environment the machine is in, the ambient room
temperature and the final set temperature.
• The wine dispenser allows you to select
the preferred and recommended wine
temperatures, ranging from 7°C (45°F) to
20°C (68°F) depending on the type of wine.
• You can set the desired temperature
manually or choose one of the twenty wine
type preset temperatures provided.
• On the control panel (7), press the 'Chamber
Select' button (7-b) to select the left or right
chamber. On the LCD display (1), an arrow
will indicate the selected chamber.
• To set a desired temperature manually:
- Press the 'Temp' button (7-c).
- Adjust the temperature by using the UP/
DOWN button (7-e) to increase or decrease
the temperature.
- Press the 'Temp' button again to confirm the
setting.
• To use a preset temperature:
- On the control panel (7), press the 'Wine
Type' button (7-d).
- Select from the 20 different types of pre-set
wine using the UP/DOWN button (7-e).
- Press the 'Wine Type' button again to
confirm the setting.
13
24/10/2014 2:38 PM