Bench Grinder Safety Warnings - Bosch GBG 60-20 Professional Originalbetriebsanleitung

12 | English
Maintain power tools and accessories. Check for mis-
u
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly main-
u
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
u
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
u
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.

Bench grinder safety warnings

Do not use a damaged accessory. Before each use, in-
u
spect the accessory such as abrasive wheels for chips
and cracks. After inspecting and installing an access-
ory, position yourself and bystanders away from the
plane of the rotating accessory and run the power tool
at maximum no-load speed for one minute. Damaged
accessories will normally break apart during this test
time.
The rated speed of the accessory must be at least
u
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
Never grind on the sides of a grinding wheel. Grinding
u
on the side can cause the wheel to break and fly apart.
Wear safety goggles.
Never leave the tool unattended before it has come to
u
a complete stop. Cutting tools that are still running can
cause injuries.
Store the power tool and accessories safely when it is
u
not in use. The storage location must be dry and lock-
able. This prevents the power tool from storage damage,
and from being operated by untrained persons.
Check the cable regularly and have a damaged cable
u
repaired only by an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
1 609 92A 52A | (25.07.2019)
Connect the tool to a mains supply that is properly
u
connected to earth. The socket and extension cable
must have a fully functioning protective conductor.
Keep your work area clean. Material mixtures are partic-
u
ularly hazardous. Light metal dust may catch fire or ex-
plode.
Protect the grinding tool against impact, shock and
u
grease.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Keep your hands away from the grind-
ing wheel while the power tool is run-
ning. There is a risk of injury if any con-
tact with the grinding wheel occurs.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles.
Wear a dust mask.
Wear protective gloves.
Bosch Power Tools