Bench Grinder Safety Warnings; Product Description And Specifications - Bosch GBG 60-20 Professional Originalbetriebsanleitung

OBJ_BUCH-3096-002.book Page 12 Friday, June 2, 2017 5:02 PM
12 | English
paired before use. Many accidents are caused by poorly
maintained power tools.
 Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
 Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping sur-
faces do not allow for safe handling and control of the tool
in unexpected situations.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.

Bench grinder safety warnings

 Do not use a damaged accessory. Before each use,
check the grinding wheel for chips and cracks. If the
machine or application tool is dropped, inspect for
damage or install an undamaged application tool. After
inspecting and installing the application tool, position
yourself and bystanders away from the plane of the ro-
tating application tool and run the power tool at maxi-
mum no-load speed for one minute. Damaged applica-
tion tools will normally break apart during this test time.
 The rated speed of the accessory must be at least equal
to the maximum speed marked on the power tool. Ac-
cessories running faster than their rated speed can break
and fly apart.
 Never grind on the sides of grinding wheels. Grinding on
the sides can cause grinding wheels to break and fly apart.
Wear safety goggles.
 Store the power tool and the application tool in a safe
manner when not being used. The storage location
must be dry and lockable. This prevents the power tool
from storage damage, and from being operated by un-
trained persons.
 Check the cable regularly and have a damaged cable re-
paired only through an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
 Connect the machine to a mains supply with proper
earthing connection. Socket outlet and extension cable
must be equipped with an operative protective conductor.
 Keep your workplace clean. Blends of materials are par-
ticularly dangerous. Dust from light alloys can burn or ex-
plode.
1 609 92A 3NU | (2.6.17)
 Protect the grinding tool against impact, shock and
grease.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more safely.
Symbols and their meaning
Keep your hands out of the grinding
wheel area while the machine is running.
Danger of injury in case of contact with the
grinding wheel.
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Bosch Power Tools