Set Time; Set Autoswitch - VWR SAS Super IAQ Bedienungsanleitung

Set time; Set Autoswitch; Display Record; Clear Record; Language; Identify; Sampling site.
Always start from 'UTILITY MODE' to reach one of these sub menus.
Switch on the instrument and wait until the main screen is displayed:
Press the "Up" or "Down" arrows to reach the:
Press the '"ENTER' button, the first sub menu is then listed.

'SET TIME'

This option is used to programme day, month, year and time of day.
Press 'ENTER' and the "Up" or "Down" arrows to change the month
Press 'ENTER' and the "Up" or "Down" arrows to change the day
Press 'ENTER' and the "Up" or "Down" arrows to change the year
Press 'ENTER' and the "Up" or "Down" arrows to change the hours
Press 'ENTER' and the "Up" or "Down" arrows to change the minutes
Press 'ENTER' to confirm and exit

'SET AUTOSWITCH'

To save battery consumption the SAS automatically switches off after 4 minutes. The 'SET AUTOSWITCH' option is
used to enable or disable the automatic switch-off.
From the 'UTILITY MODE' select 'SET AUTOSWITCH':
Press 'ENTER' and the "Up" or "Down" arrows to change between the two options:
Select the desired options and press' ENTER' to confirm and exit.
This setting will be lost after the instrument is switched off.