General Description; Function Description; Summary; Assembly - FLORABEST FRM 1800 A1 Originalbetriebsanleitung

GB
MT
• To fix on the power cable, use the
cable suspension intended for the pur-
pose.
• Keep the power cable away from the
cutting tool when working. The cutting
blades may damage the power cable
and result in contact with live parts. Al-
ways run the power cable behind the
operator.
• Do not use the power cable to pull
the plug from the socket. Protect the
power cable from heat, oil and sharp
edges.
• Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged. If the power
cable is damaged, it must be replaced
by the manufacturer, the customer
services of the same, or a qualified
person, in order to avoid hazards.
• Do not connect a damaged power
cable to the mains. Do not touch
a damaged power cable when it is
connected to the mains. A damaged
power cable may result in contact with
live parts.

General Description

Function Description

The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It
is equipped with a high performance elec-
tric motor, robust plastic housing, safety
switch, collision guard, and grass bag. Ad-
ditionally, the equipment is height adjust-
able to six levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.
44

Summary

1 Curved handle
A
2 Wing nuts
3 Lower bar
4 Grass bag
5 Cut height adjusting lever
6 Wheels
7 Lawnmower housing
8 Handle
9 Collision guard
10 Cable holder
11 Release button (not visible)
12 Power cable outlet
13 Cable strain relief
14 Power cable
15 Start lever

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

1. Insert the lower bar (3) into the
B
slot on the lawnmower housing
(7).
2. Fix the bar (3) using the en-
closed screws (16).
C
3. Fix the curved handle (1) using
the enclosed screws (49) and
the wing nuts (2) on the lower
bar (3). There are two possible
positions.
4. Clip the cable hooks (
the bar (3) and the handle (1) to
fasten the cable.
When both wing nuts are loos-
ened, the curved handle can be
folded down for storing the equip-
ment. Ensure that the power cable
is not caught.
A 10) into