Herunterladen Inhalt Inhalt Diese Seite drucken

Grohe Eurosmart Cosmopolitan E 36 332 Montageanleitung Seite 9

Vorschau ausblenden Andere Handbücher für Eurosmart Cosmopolitan E 36 332:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Adjustment
For temperature adjustment, see fold-out page I, Figs. [3]
and [4].
• Before the mixer is put into service, if the mixed water
temperature measured at the point of discharge varies from
the specified temperature set on the thermostat.
• After any maintenance operation on the thermostatic
cartridge.
Applying settings
The infrared electronics provide seven preset programmes for selection. Programme 1 is set at the factory.
Programme
Temporary
shutoff*
Programme 1
Active
Programme 2
Active
Programme 3
Active
Programme 4
Active
Programme 5
Active
Programme 6
Inactive
Programme 7
Inactive
* Cleaning mode can be activated when temporary shutoff is activated. In cleaning mode, water flow is not started for 3 minutes
even if an object is detected.
** Automatic flushing serves to ensure water hygiene in the event of long-term non-utilisation of the fitting. Flushing is initiated
for a duration of 5 minutes after 24 hours (usage-independent) or for a duration of 1 or 5 or 10 minutes after 72 hours (usage-
dependent) after the fitting was last used.
Safety note:
Ensure free draining in the case of activated automatic flushing.
The fitting can be individually programmed using the remote control (see Special accessories, prod. no.: 36 206).
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk
1. Start water flow and measure the temperature of the water
using a thermometer, see Fig. [3].
2. Detach temperature control handle (C), see Fig. [4].
3. Turn regulating nut (D) until the water temperature has
reached 38 °C.
4. Install temperature control handle (C) so that button (E)
points towards the front, see Fig. [3].
Automatic flushing**
On/off
Flush interval Flush duration
Off
-
-
On
72 h
5 min
On
24 h
5 min
On
72 h
10 min
On
72 h
1 min
Off
-
-
On
72 h
5 min
Duration
of thermal
disinfection
Usage-dependent/
independent
-
3.5 min
Usage-dependent
3.5 min
Usage-independent
11 min
Usage-dependent
3.5 min
Usage-dependent
3.5 min
-
3.5 min
Usage-dependent
3.5 min
6

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis