Intended Use; Assembly And Adjustment - Worx Professional WU700.1 Bedienungsanleitung

Symbols
To reduce the risk of injury, user must read instruction manual
Warning
Wear eye protection
Wear dust mask
Wear ear protection
Double insulated
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.

Intended use

Note: Before using the tool, read the instruction book carefully.
The machine is intended for cutting, roughing and brushing metal and
stone materials without using water. For cutting stone, a cutting guide
is required.

Assembly and adjustment

MOUNTING THe PROTeCTIve DevICeS
1
AUxIlIARy HANDle
For all work with the machine, the auxiliary handle (3) must be
mounted. Screw the auxiliary handle (3) on the right or left of the
machine head depending on the working method. (See Fig. A)
Do not make any alterations to the auxiliary handle.
Do not continue to use an auxiliary handle if it is damaged.
MOUNTING THe GRINDING TOOlS
Before any work on the machine itself, pull the mains plug.
Grinding and cutting discs become very hot while working; do
not touch until they have cooled.
1
SPINDle lOCK BUTTON
Clean the grinder spindle and all parts to be mounted. For clamping
and loosening the grinding tools, lock the grinder spindle (7) with the
spindle lock button (4).
Actuate the spindle lock button (4) only when the grinder spindle
is at a standstill!
10