CAMPAGNOLO BORA ONE 35 Bedienungsanleitung Seite 19

4.4 - 11S, 12S SRAM CORPORATION SPROCKETS (on RL Campagnolo body FOR Sram Corporation RL XD BODY)
This wheel is also compatible with the SRAM XD body (version with 30 mm pawl zone diameter).See the instruction sheet provided by the sprocket pack manu-
facturer for installation, removal and maintenance instructions.
5 - BRAKES
5.1 - ASSEMBLING THE ROTOR ON AXIAL FIXING SYSTEM SYSTEMS
™
• Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow (Fig. 8).
• Fit the washer (A - Fig. 8) and screw the provided lockring (B – Fig. 8).
• Tighten the lockring to 40 Nm (354 in.lbs) using the tool UT-BB130 (C - Fig. 8 - not provided) and
torque wrench (D - Fig. 8).
A B C D
A B C D
35 N.m
40 Nm
(354 in.lbs)
8
8