Promise VTRAK E610f Kurzanleitung Seite 32

VTrak E-Class Quick Start Guide
5. To verify the maintenance mode settings, type net -m and press Enter.
administrator@cli> net -m
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
CtrlId: 1
Type: Management Ethernet
IP: 192.168.10.101
MAC: 00:01:55:AE:02:AE
Gateway: 192.168.10.1
This completes the Management port setup. Go to "Step 8: Creating Disk Arrays
with WebPAM PROe" on page 35.
To see the full set of CLI commands, at the admin@cli> prompt, type help and
press Enter.
Setting up with the CLU
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
Figure 25.CLU main menu
2. With Quick Setup highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Port: 1
IPType: IPv4
IPMask: 255.255.255.0
DNS: 0.0.0.0
DHCP: Disabled
32