Step 5: Setting Up Serial Cable Connections - Promise VTRAK E610f Kurzanleitung

Step 5: Setting Up Serial Cable Connections

Serial communication enables the Command Line Interface (CLI) and Command
Line Utility (CLU) on your PC to monitor and control the VTrak. The VTrak
package includes one RJ11-to-DB9 serial data cable for each controller.
Figure 22. A serial connector is located on the controller. The E310f is
shown. The E610f, E610s, and E310s are similar
To set up a serial cable connection:
1. Attach the RJ11 end of the serial data cable to the RJ11 serial connector on
one of the I/O modules.
2. Attach the DB9 end of the serial data cable to a serial port on the Host PC or
Server.
Mgmt
Mgmt
UPS
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s
115200
8 N 1
The DB9 connector on the VTrak controller is for a UPS support,
which is planned for a future release.
Step 5: Setting Up Serial Cable Connections
UPS
115200
8 N 1
Mgmt
UPS
FC 1 FC 2
4 4
2 2
1 1
Gb/s Gb/s
115200
8 N 1
Note
27
RJ11 Serial
Connector