asalvo WONDER-FIX Gebrauchshinweise Seite 25

5
WHen usinG tHe isofiX, You
Must use tHe toP tetHer.
after installed the child seat by
isofiX, use the top tether to
hook the fixed point of vehicle
seat. any position (vertically,
horizontally, diagonally) can be
acceptable. if you installed the
top tether correctly, the head of
top tether will turn to green (5G,
5H, 5i).
Keep pressing the white switch
can adjust the tightness of top
tether (5J, 5K).
•Remove: Turn the ISOFIX
connectors switches off and
the indicators should be red
(5e), meanwhile you will hear
the "click" sound, the isofiX
connectors will be bounce off
and then can be removed from
the anchorage system of vehicle
seat(5f).
15-25kG ChILdREN INSTALLATION
1
remove the 5-point harness if your
child's weight between 15 and 25kg.
the product only suitable if the
vehicle is approved and equipped
with a 3- point safety belts.
reMoVinG tHe 5-Point
Harness
• Release the harness (see 4.3) and
move it to the back of child seat.
• Find the harness connector from
behind, take out the belt from
harness connector (6.1a).
• Push down 2 holes a little bit and
pull out, then you can open the back
cover (6.1B).
• Take out 2 belts from the slot
(6.1c).
• Pull out the metal bar, take out 2
fixing straps of shoulder belts (6.1D).
(5I).
(5h).
(5J).
(6.1A).
(6.1B).
INSTRUCTIONS
(5G).
(5k).
EN