Valrom Industrie SOFT 10 Montage- Und Bedienungsanleitung Seite 35

When pressing the key MENU „ " of the valve, this one will return to the previous menu. If during 1
minute no key is to be pressed, the valve will return to the stand-by menu. Any modified value will return
to the initial value if not saved by means of SET „■" key.
!
This parameter is NOT to be modified;
In case the station does not operate appropriately, you should contact the staff of
S.C. Valrom Industrie S.R.L.
3.4.7.2. Brine draw duration time setting
꞊꞊꞊꞊꞊Brine Draw Duration꞊꞊꞊꞊꞊
Use keys UP „▲" and DOWN „▼" to change values and the key SET „■" to save modifications. The
following window will appear after saving modifications:
When pressing the key MENU „ " of the valve, this one will return to the previous menu. If during 1
minute no key is to be pressed, the valve will return to the stand-by menu. Any modified value will return
to the initial value if not saved by means of SET „■" key.
!
This parameter is NOT to be modified;
In case the station does not operate appropriately, you should contact the staff of
S.C. Valrom Industrie S.R.L.
3.4.7.3. Fast rinse duration time setting
Use keys UP „▲" and DOWN „▼" to change values and the key SET „■" to save modifications. The
following window will appear after saving modifications:
When pressing the key MENU „ " of the valve, this one will return to the previous menu. If during 1
minute no key is to be pressed, the valve will return to the stand-by menu. Any modified value will return
to the initial value if not saved by means of SET „■" key.
!
This parameter is NOT to be modified; In case the station does not operate appropriately,
you should contact the staff of S.C. Valrom Industrie S.R.L.
00 minutes
Press to Return
Press ■ to Confirm
Setting Complete!
Press to Return
꞊꞊꞊꞊꞊Rinse Duration꞊꞊꞊꞊꞊
00 minutes
Press to Return
Press ■ to Confirm
Setting Complete!
Press to Return
35