Cordless Shaving - Silvercrest SRR 3.7 A1 Bedienungsanleitung

♦ As soon as the battery is fully charged, the
permanently on the display and the battery charge level indica-
tor shows 99%.
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.

Cordless shaving

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
You can use the shaver without the cable. In this case, you must charge
the appliance before first use (see section "Charging the batteries").
1) If it is not already attached, push the protective collar
below onto the shaver unit
2) Attach the shaver unit
the drive shaft
correctly on the handset.
3) Remove the protective cap
4) Press the on/off button
shows the current charge level and the shaver starts.
NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the
dry shaving system.
5) Move the shaving heads with straight and circular motions over
the skin.
6) When you have covered all the areas that you want to shave,
press the on/off button
3 seconds, the display will switch off.
│ GB │ MT
■ 70
(see fold-out page).
with the fitted protective collar
. Ensure that the protective collar
.
. The battery charge level indicator
. The appliance stops. After approx.
symbol appears
from
onto
is sitting
SRR 3.7 A1