Inhaltsverzeichnis
Werbung
PIC MUTING key
Cuts off the image. Press again to restore
the image.
AUDIO MUTING key
Mutes the audio output. Press again to
restore the previous volume.
VOLUME +/– key
For adjusting the volume output.
*2
FREEZE key
Pauses a projected image. Press again to
restore the image.
Notes
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
*2: Use this key when inputting a
computer signal.
f Setting the energy–saving mode
easily
ECO MODE key
Energy-saving mode can be set easily.
Energy-saving mode consists of "Lamp
Mode," "Power Saving Mode" and
"Standby Mode."
1 Press the ECO MODE key to display
the ECO Mode menu.
ECO Mode Menu
ECO Mode
ECO
User
Sel:
2 Press the V/v key or ECO MODE key
to select ECO or User mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Low
Power Saving Mode: Standby
Standby Mode: Low
(go to step 6)
User: Sets each item of the energy-
saving mode menu as you desire
(go to step 3).
Others
g Infrared transmitter
About Remote Commander operation
• Direct the Remote Commander toward the
• The shorter the distance between the
• Make sure that nothing obstructs the
Exit:
3 Select "User" then press the b key.
The setting items appear.
User
Lamp Mode
Power Saving Mode
Standby Mode
Sel:
Set:
4 Press the V/v key to select the item
then press the ENTER key.
5 Press the V/v key to select the setting
value.
6 Press the ENTER key to restore the
User screen.
For details on ECO Mode settings, see
"Lamp Mode" (page 29) and "Standby
Mode" (page 29) on the INSTALL
SETTING menu and "Power Saving
Mode*4" (page 27) on the SET
SETTING menu.
remote control detector.
Remote Commander and the projector is,
the wider the angle within which the
Remote Commander can control the
projector becomes.
infrared beam between the Remote
Commander and the remote control
detector on the projector.
Location and Function of Controls
Low
Off
Low
Exit:
15
Werbung
Inhaltsverzeichnis
