Verwandte Anleitungen für Sony VPL-BW120S
Inhaltszusammenfassung für Sony VPL-BW120S
- Seite 1 4-436-147-11 (1) Video Projector Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. VPL-BW120S Sony Corporation Printed in China © 2012 Sony Corporation...
-
Seite 2: Warning
– Consult the dealer or an experienced EARTHED. radio/TV technician for help. WARNING If you have any questions about this product, you may call; Sony Customer Information When installing the unit, incorporate a Service Center 1-800-222-7669 or readily accessible disconnect device in the http://www.sony.com/ fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. - Seite 3 Canadian ICES-003. confiez toute réparation à un personnel For the customers in Europe qualifié. The manufacturer of this product is Sony Pour les clients au Canada Corporation, 1-7-1 Konan, Minato-ku, Cet appareil numérique de la classe B est Tokyo, 108-0075 Japan.
- Seite 4 Das Namensschild befindet sich auf der DESCARTE DE PILHAS E BATERIAS Unterseite des Gerätes. Für Kunden in Europa Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan. Der autorisierte Repräsentant für EMV und Produktsicherheit ist Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Deutschland.
-
Seite 5: Inhaltsverzeichnis
Table of Contents WARNING .........2 Adjustments and Settings Precautions .........6 Using a Menu Using a MENU ........ 23 Overview The PICTURE SETTING Menu ..24 Checking the Supplied The INPUT SETTING Menu ..25 Accessories ........10 The SET SETTING Menu ....27 Installing Batteries ......10 The MENU SETTING Menu .. -
Seite 6: Precautions
• Check that the operating voltage of your unit is identical with the voltage of your local power supply. If voltage adaptation is required, consult with qualified Sony personnel. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified Sony personnel before operating it further. - Seite 7 • Do not use the Security bar for the purpose • Avoid using the unit in a location where of preventing theft for transporting or the temperature or humidity is very high, installing the unit. If you lift the unit by the or temperature is very low.
- Seite 8 Sony personnel. • On cleaning the cabinet: Clean the cabinet gently with a soft cloth. Stubborn stains may be removed with a...
- Seite 9 a message displayed on the projected image, even if the lamp normally lights. For carrying This unit is precision equipment. When carrying the unit, do not subject the unit to shocks, or fall. It may damage the unit. Precautions...
-
Seite 10: Checking The Supplied Accessories
AC power cord (1) Signal cable (HD D-sub 15-pin y 3 × phono plug) (1.8 m) (1) Insert a lithium battery. (9-885-125-47/Sony) Câble de signal (HD D-sub 15 broches y 3 × fiche phono) (1,8 m) (1) (9-885-125-47/Sony) With the 3 (plus) side facing up. - Seite 11 vigueur dans le pays ou la région où vous vous trouvez. VORSICHT Explosionsgefahr bei Verwendung falscher Batterien. Batterien nur durch den vom Hersteller empfohlenen oder einen gleichwertigen Typ ersetzen. Wenn Sie die Batterie entsorgen, müssen Sie die Gesetze der jeweiligen Region und des jeweiligen Landes befolgen.
-
Seite 12: Location And Function Of Controls
Location and Function of Controls Main unit g LAMP/COVER indicator (page 31) h Control panel (page 14) i Connector panel (page 13) j Remote control detector k Front feet (adjustable) (page 20) l Speaker m Security lock a Projection lens Connects to an optional security cable manufactured by Kensington. -
Seite 13: Connector Panel
Connector Panel Input (pages 16, 17) Others a INPUT A e SERVICE Video: RGB/YP input connector This connector is for service purposes (RGB/YP only, and not for customer use. Audio: Audio input connector (AUDIO) f AC IN (-) socket b INPUT B Connects the supplied AC power cord. -
Seite 14: Remote Commander And Control Panel
Remote Commander and Control Panel Remote Commander a Turning on the power/Going to standby mode ?/1 (On/Standby) key b Selecting an input signal INPUT ECO MODE (page 19) INPUT key MENU RESET c Operating a menu (page 23) ENTER MENU key RESET key RETURN ENTER /V/v/B/b (arrow) keys... - Seite 15 PIC MUTING key 3 Select “User” then press the b key. Cuts off the image. Press again to restore The setting items appear. the image. AUDIO MUTING key User Mutes the audio output. Press again to Lamp Mode restore the previous volume. Power Saving Mode Standby Mode VOLUME +/–...
-
Seite 16: Connecting The Projector
B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. -
Seite 17: Connecting A Video Equipment
Connecting a Video equipment Connections with a VHS video deck, DVD player, or BD player are explained for each input signal. S VIDEO IN For connecting video equipment with an S-video output connector. S video cable (not supplied) S video output connector Video equipment Audio output... - Seite 18 INPUT B For connecting video equipment with an HDMI output connector. DVI-D output HDMI-DVI-D cable connector (not supplied) Computer HDMI cable HDMI output (not supplied) connector Video equipment Notes • Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them. •...
-
Seite 19: Projecting/Adjusting An Image
B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance” (page 42) and projected image sizes, see Computer Video equipment... -
Seite 20: Adjusting The Projected Image
Adjusting the Projected image Focus Position Foot adjust button Adjusting the tilt of the projector with the front feet (adjustable) You can adjust the height of the projector using the front feet (adjustable). By changing the slope of the projector with the front feet (adjustable), you can adjust the position of the projected image. - Seite 21 Changing the aspect ratio of the projected image Press ASPECT on the remote commander to change the aspect ratio of the projected image. You can also change the setting in Aspect of the INPUT SETTING menu (page 25, page 26). Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted.
-
Seite 22: Turning Off The Power
Turning Off the Power Press the ?/1 key on the main unit or the Remote Commander. The message appears. Press it again according to the message. Unplug the AC power cord from the wall outlet. After step 1, the fan continues to run for a while to reduce internal heat, however, you may also unplug the AC power cord before the fan stops. -
Seite 23: Using A Menu
B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. factory preset value, press the RESET Press the MENU key to display the key during setting or adjusting. -
Seite 24: The Picture Setting Menu
The PICTURE SETTING Menu For adjusting the picture for each input signal. Items Item descriptions Picture Mode Dynamic: Emphasizes the contrast to produce a “dynamic and vivid” picture. Standard: Makes the picture be natural and well balanced. Game: Select for viewing game picture. Living: Select for viewing sports, music, and digital video camera picture. -
Seite 25: The Input Setting Menu
The INPUT SETTING Menu For adjusting the size, position, and aspect ratio of the projected image for each input signal. Items Item descriptions Adjust Signal Adjusts the image of computer signal. Use this item if the edge of the image is cut and reception is bad. - Seite 26 Aspect *1: If you select “Normal,” the image is Input signal Recommended projected in the same resolution as the setting value and input signal without changing the aspect projected image ratio of the original image. *1 *2 *3 (4:3) (Full1) *2: If you select “Full2,”...
-
Seite 27: The Set Setting Menu
The SET SETTING Menu The SET SETTING menu is used for setting various functions of the projector. Items Item descriptions Smart APA On/Off: When set to “On,” executes APA automatically when a signal *1 *2 is input. Auto Input Search On/Off: When set to “On,”... -
Seite 28: The Menu Setting Menu
The MENU SETTING Menu The MENU SETTING menu is used for setting for the operations by using the menu or the Remote Commander. Items Item descriptions Status On: All on-screen statuses are enabled. Off: Turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. -
Seite 29: The Install Setting Menu
*2: When “High Altitude Mode” is set to “On,” the speed of the fan increases, and the fan noise becomes slightly louder. *3: You will not be able to use the projector if you forget your password. If you call qualified Sony personnel because you have forgotten the password, you will be asked to verify the projector’s serial number and your identity. -
Seite 30: The Information Menu
The INFORMATION Menu The INFORMATION menu enables you to confirm various information on the projector, such as the total usage hours of a lamp. Items Item descriptions Model Name Displays the model name. Serial No. Displays the serial number. Displays the horizontal frequency of the current input signal. Displays the vertical frequency of the current input signal. -
Seite 31: Indicators
Flashes in red The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If the symptom is shown again, consult with qualified Sony personnel. Flashes twice The internal temperature is unusually high. Check the items below. -
Seite 32: Messages List
Messages List When any of the messages listed below appears on the projected image, address the problem in accordance with the table below. Message Meaning/Remedy Page High temp.! Lamp off in Check the items below. 12, 37 1 min. • Check to see if nothing is blocking the ventilation holes. •... -
Seite 33: Troubleshooting
Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptom Remedy Page The power is not turned Check if the AC power cord is firmly connected. – When the “Panel Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector. - Seite 34 Symptom Remedy Page The image is not clear. Check if the projector is in focus. The picture will not be clear if condensation has accumulated – on the lens. In such a case, let the projector sit for about two hours with the power on.
-
Seite 35: Replacing The Lamp
Do not put your hands into the slot. • If the lamp breaks, contact qualified Sony personnel. Do not replace the lamp yourself. • When removing the lamp, be sure to pull it out straight, by holding the designated location. - Seite 36 Insert the new lamp all the way in until Caution it is securely in place. Tighten the Disposal of the used lamp 2 screws. For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations.
-
Seite 37: Cleaning The Air Filter
If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. -
Seite 38: Specifications
Specifications Item Description Model VPL-BW120S Projection system 3 LCD system Display device Effective display 0.59-inch (15.0 mm), 3 plate, Aspect ratio 16:10 size Effective picture 3,072,000 pixels (1280 × 800 pixels, 3 plate panels) elements Projection lens Focus Manual Light source... - Seite 39 *2: Information on accessories in this manual is current as of June 2012. *3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. Design and specifications of the unit, including the optional accessories, are subject to change without notice.
-
Seite 40: Pin Assignment
Pin assignment RGB input connector (Mini D-sub HDMI connector (HDMI, female) 15-pin, female) T.M.D.S. T.M.D.S. Data2+ Clock Shield T.M.D.S. T.M.D.S. Video input Power supply (red) R input for DDC Data2 Shield Clock– Video input T.M.D.S. N.C. (green) G Data2– Video input T.M.D.S. - Seite 41 Input connector Acceptable Input Signals fH [kHz]/ Resolution fV [Hz] HDMI Computer signal 1440 × 900 55.9/60 Input connector fH [kHz]/ Resolution 1280 × 800 49.7/60 fV [Hz] HDMI 640 × 350 31.5/70 Digital TV signal 37.9/85 Input connector 640 × 400 24.8/56 Signal fV [Hz]...
-
Seite 42: Projection Distance
Projection Distance The following describes the projection distance and height from lens center to bottom of screen by each projected screen size. The projection distance is the distance between the center of the lens and the surface of the projected image. Height H is the height from the bottom of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line from lens center to projected image surface). - Seite 43 Expression#2 Height H from lens center to bottom of screen H=0.00296 × D (H=0.11660 × D) Projection Distance...
- Seite 44 Ceiling Installation (Top side parallel to ceiling) Caution Never mount the projector on the ceiling or move it by yourself. Be sure to consult with qualified Sony personnel (charged). Height H from Center of the lens lens center to top of screen...
-
Seite 45: Dimensions
Dimensions Front 313.4 (12 79.7 (3 Unit: mm (inches) Side 349.3 (13 269 (10 144.9 114.1 Unit: mm (inches) Dimensions... - Seite 46 Side (Top side parallel to ceiling) 69.4 Center of the lens 79.9 (3 Unit: mm (inches) Bottom 27.3 (1 24.4 ( 40.2 Center of the lens 77 (3 131.8 40.2 8.2 ( 24.4 ( 18.1 ( 22.7 ( 79.3 (3 125.4 (4 249 (9 Unit: mm (inches)
-
Seite 47: Index
Index H Size ............25 High Altitude Mode ........ 29 Hue ............24 AC IN ............13 Acceptable input signal ......41 Image Flip ..........29 Adjust Signal ...........25 Information menu ........30 Air filter ...........37 Input ............13 Air filter cover/Ventilation holes (intake) 12 INPUT SETTING menu ...... - Seite 48 About Trademarks Rear foot (adjustable) ......12, 20 • Kensington is a registered trademark of Remote commander ........ 14 Kensington Technology Group. Remote control detector ......12 • HDMI, HDMI logo and High-Definition Replacing the lamp ......... 35 Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.