Setting The Remote Control Ids; Setting Procedure - Panasonic GP-VD150E Bedienungsanleitung

Setting the remote control IDs

The wireless remote controller (optional accessory) is
capable of operating up to four units.
IDs are used to set which units are selected when the
[CAM1], [CAM2], [CAM3] and [CAM4] buttons on the
wireless remote controller have been pressed.
p p When using a multiple number of units, set a different
remote control ID for each unit.
p p When using one unit, set the remote control ID to "CAM1"
unless the setting needs to be changed.

Setting procedure

Operate the IR ID switch on the units rear panel, and select
"CAM1", "CAM2", "CAM3" or "CAM4" as the remote control
ID. (See page 13)
The IR ID switch settings "CAM1" to "CAM4" correspond
to the [CAM1] to [CAM4] buttons on the wireless remote
controller.
(The factory setting is "CAM1".)
IR ID switches
[CAM1] to [CAM4] buttons
17 (E)